100KN High Voltage Porcelain suspension Insulators for earth line
| ||Technical Specification||Unit||Value|
|4||Coupling Size|| ||16|
|5||Rated M&E Strength||KN||100|
|7||Power Frequency Withstand Voltage|| || |
|8 ||power freq. (dry or wet )flashover voltage20mm gap||KV||30|
|9||Power arc extinguish current at 15mm gap 2500V (min.) intruction
| ||capacity current||A||20|
|10 ||Puncture Voltage||KV||110|
Pole arc resistibility (min.)
power freq. current
| ||Arcing times||2|
suspension insulators have below advanced charactors :
1 the insulation part use high aluminum porcelain C120 , glaze color
2 metal cap are made of ductile iron ,metal pins are made of forged steel .
all the metal fittngs are hot-galvanized .
3 each piece of insulators are routine tested , test items including:
routine tension load strength test , which will apply 50% of rate
mechanical strength withstand 1 minutes . after this test , we
conduct routine flashover test , will check each piece of insulators one by
one , to sort defect unit out.
4 we will test each batch of insulators with sample test ,
including below items:
dimensional check , temperature cycle test , M&E failing load
test , puncture test , galvanization thickness test , porosity test
the U100E product are Suitable for earth line only , the purpose is
just protect transmission lines.
the HIVOLT insulator U100E have very good M & E performance ,
we offer 2 years quality guarantee .
every units of insulators are tested qualified , to guarantee all
insulators are without any defect.
if customer can provide technial data , We will make related
insulators design . OEM product are available .